H4-04: Terminal AM Analog Output Select

No. (Hex.)	Name	Description	Default (Range)
H4-04 (0420)	Terminal AM Analog Output Select	Sets the monitoring number (Ux-xx) to be output from MFAO terminal AM.	103 (000 - 9999)

No.

(Hex.)

Name

Description

Default

(Range)

H4-04

(0420)

Terminal AM Analog Output Select

Sets the monitoring number (Ux-xx) to be output from MFAO terminal AM.

103

(000 - 9999)

Note:

Set the x-xx part of the Ux-xx [Monitor]. For example, set H4-04 = 103 to monitor U1-03 [Output Current].

When the x part of Ux is a letter, replace the letter (hexadecimal number) with a decimal number. For example, set H4-04 = 1301 to monitor Ud-01.
You cannot use all of the monitors in all of the control methods.
When you use the terminal in through mode, set this parameter to 000 or 031. You can set the terminal AM output level from the PLC through MEMOBUS/Modbus communications or the communication option.