|
No.
(Hex.)
|
Name
|
Description
|
Default
(Range)
|
|
o3-06
(0BDE)
|
Auto Parameter Backup Selection
|
        
Sets the function that automatically backs up parameters. This parameter is only available when using an LCD keypad.
|
1
(0, 1)
|
When you connect the drive and keypad, parameters set to the drive are automatically backed up to the keypad as specified by the setting of parameters o3-06 and o3-07.
- 0
- Disabled
-
- 1
- Enabled
-
Note:
When you replace the LCD keypad then energize the drive, the keypad shows the restore operation screen automatically to restore the drive configuration with the parameters backed up to the LCD keypad. If you connect an LCD keypad that does not have parameter backup data, the keypad will not show the restore operation screen.