o5-05: Log Monitor Data 3

No. (Hex.)	Name	Description	Default (Range)
o5-05 (1555) RUN	Log Monitor Data 3	Sets the data log monitor (Ux-xx). This parameter is only available when you use an LCD keypad.	103 (000, 101 - 9999)

No.

(Hex.)

Name

Description

Default

(Range)

o5-05

(1555)

RUN

Log Monitor Data 3

Sets the data log monitor (Ux-xx). This parameter is only available when you use an LCD keypad.

103

(000, 101 - 9999)

Note:

Set the x-xx part of the Ux-xx [Monitor]. For example, set o5-05 = 103 to monitor U1-03 [Output Current].

When the x part of Ux is a letter, replace the letter (hexadecimal number) with a decimal number. For example, set o5-05 = 1301 to monitor Ud-01.
When it is not necessary to set a data log monitor, set this parameter to 000.