o5-15: Trigger Type Selection

No. (Hex.)	Name	Description	Default (Range)
o5-15 (1E82) RUN	Trigger Type Selection	Sets the type of trigger for the short-term data log. This parameter is only available when you use an LCD keypad.	0 (0, 1)

No.

(Hex.)

Name

Description

Default

(Range)

o5-15

(1E82)

RUN

Trigger Type Selection

Sets the type of trigger for the short-term data log. This parameter is only available when you use an LCD keypad.

(0, 1)

0
Digital Trigger: A digital signal inside the drive will act as the trigger.
1
Analog Trigger: An analog signal inside the drive will act as the trigger.

Note:
There are no detection width and detection time settings for the analog trigger in the data log function. If variations in the analog signal are a problem, set o5-15 = 0 and o5-16 = 66, 67 [Digital Trigger Object = Comparator 1, 2]. Use H2-20 [Comparator 1 Monitor Selection] to H2-32 [Comparator 1 Filter Time] to set the conditions for the comparator function.