Jump to main content

o5-19: Trigger Condition

No.

(Hex.)

Name

Description

Default

(Range)

o5-19

(1E86)

RUN

Trigger Condition

Sets the condition with which to detect the trigger. This parameter is only available when you use an LCD keypad.

0

(0, 1)
0
Rising Edge

  • Digital trigger: The drive detects the trigger when the digital trigger target switches from OFF to ON.

  • Analog trigger: The drive detects the trigger when the analog trigger target changes from “less than” to “equal or more than” the trigger level set in o5-18 [Analog Trigger Level].

1
Falling Edge

  • Digital trigger: The drive detects the trigger when the digital trigger target switches from ON to OFF

  • Analog trigger: The drive detects the trigger when the analog trigger target changes from “equal to or more than” to “less than” the trigger level set in o5-18 [Analog Trigger Level].