|
No.
(Hex.)
|
Name
|
Description
|
Default
(Range)
|
|
T3-02
(0761)
|
Test Signal Amplitude
|
        
Sets the amplitude of the test signal applied to the motor during Inertia Tuning. Usually it is not necessary to change this setting.
|
0.5 rad
(0.1 - 10.0 rad)
|
If the load inertia is too large and the drive detects a fault after Inertia Tuning, decrease the setting. If the drive detects a fault when T3-01 [Test Signal Frequency] is set to a low value, adjust this parameter.