The terminal board has switches to adapt the drive I/Os to the external control signals as shown in Figure 1.
Set the switches to select the functions for each terminal.
Figure 1. Locations of Switches
Table 1. I/O Terminals and Switches Functions
|
Position
|
Switch
|
Terminal
|
Function
|
Default
|
|
A
|
Jumper switch S5
|
AM
|
Sets the output method for terminal AM (voltage or current).
|
V (voltage output)
|
|
B
|
DIP switch S1
|
A2
|
Sets the input method for terminal A2 (voltage or current).
|
I (current input)
|
|
DIP switch S2
|
-
|
Enables and disables the MEMOBUS/Modbus communications termination resistor.
|
OFF
|