In Setup Mode, you can see and set the minimum parameters necessary for drive operation. Refer to Figure 1 for an example.

Note:

  1. Refer to Set up the Drive with General-Purpose Setup Mode and Automatic Parameter Settings Optimized for Specific Applications (Application Presets) for more information about Setup mode parameters.

  2. Push [APPL] and [ENTER key] to continue to the application selection screen. When you change the setting, it will optimize the parameter for the application. The default setting is 0 [General-purpose].

  3. To go back to the initial screen, push [ESC Key]. To change another parameter in Setup Mode, push [Up arrow key] or [Down arrow key].

Change b1-01 [Frequency Reference Selection 1] from 1 [Analog Input] to 0 [Keypad].

Figure 1. Key operation examples in Setup Mode