Drive Mode and Programming Mode

The keypad display of this drive has two modes: Drive Mode and Programming Mode.

• Drive Mode

  Use this mode to operate the drive. These operations are available:

  • Monitor operation statuses (for example, output frequency, output current, and output voltage)

  • Set the parameters that you can change while the drive is operating (for example, d1-01 to d1-17). Refer to Parameter Details for more information.

• Programming Mode

  Parameter Setting Mode These operations are available:

  • Examine and set the parameters that are not at default settings (Verify Mode)

  • See and set the basic parameters necessary for the drive operation (Setup Mode)

  • See and set all parameters (Parameter Setting Mode)

  • Automatically set motor parameters (Auto-Tuning Mode)

Table 1 gives information about the functions you can access when you push / .

Table 1. Overview of the Modes

Mode	LED Display	Description	Description	Ref.
Drive Mode (Operation of the motor and monitoring of operation status)		Frequency reference display	You can set and monitor frequency references. Note: You can change what is shown on the keypad when you energize the drive. Use o1-02 [Monitor Selection at Power-up] to set the items. When A1-02 = 6 [Control Method Selection = AOLV/PM], the display unit is %. -
		Monitor display	The keypad shows Ux-xx [Monitor].	-
		Output voltage display	You can monitor the output voltage reference. Set o1-01 [User Monitor Selection] to change the item shown on this screen.	Parameter List
		Output current display	You can monitor the output current.	-
		Output frequency display	You can monitor the frequency output from the drive.	-
		Forward/reverse selection	: Motor rotates in forward direction : Motor rotates in reverse direction Note: For applications where the motor must not rotate in reverse direction (for example, for fans and pumps), you can use b1-04 [Reverse Operation Selection] to prevent reverse rotation. How to set reverse operation	-
Programming Mode (Parameter Settings)		Auto-Tuning Mode	The drive automatically calculates and sets the motor parameters.	Auto-Tuning for Induction Motors Auto-Tuning for PM Motors Auto-Tuning in EZ Open Loop Vector Control Method
		Parameter Setting Mode	You can see and set all parameters.	Change Parameter Settings
		Setup Mode	Shows and sets basic parameters necessary for drive operation. Note: The parameters shown in the Setup Mode are different for different A1-06 [Application Preset] settings.	Setup Mode Automatic Parameter Settings Optimized for Specific Applications (Application Presets)
		Verify Menu	Lists all parameters that are not at their default settings.	Verify and Set the Changed Parameters (Verify Menu)