The procedure in this section shows how to set the time scale for the trend plot monitor.

  1. Push [F2 Key] (Home) to show the HOME screen.
    Note:

    • The keypad will show [Home] in the top right corner when the HOME screen is active.

    • If [Home] is not shown on [F2 Key], push [F1 Key] (Back) to show [Home] on [F2 Key].

  2. Push [F2 Key] (Menu).
  3. Push [Up arrow key] or [Down arrow key] to select [Monitors], then push [ENTER Key].
  4. Push [Up arrow key] or [Down arrow key] to select [Trend Plot], then push [F3 Key] (Setup).
  5. Push [Up arrow key] or [Down arrow key] to select [Trend Plot Time Scale Setting], then push [ENTER Key].
  6. Push [LEFT Key] or [RIGHT Key] to select the specified digit, then push [Up arrow key] or [Down arrow key] to select the correct number.

    • Push [F2 Key] (Default) to set the parameters to the factory default.

    • Push [F3 Key] (Min/Max) to move between the minimum value and maximum value.

  7. Push [ENTER Key] to keep the changes.

The configuration procedure is complete.