Code

Name

Causes

Possible Solutions

oPr

Keypad Connection Fault

The keypad is not securely connected to the connector on the drive.

Examine the connection between the keypad and the drive.

The connection cable between the drive and the keypad is disconnected.

  • Remove the keypad and then reconnect it.

  • Replace the cable if damaged.
Note:

  • The drive detects this fault if these conditions are correct:

    • o2-06 = 1 [Keypad Disconnect Detection = Enabled].

    • b1-02 = 0 [Run Command Selection 1 = Keypad], or the drive is operating in LOCAL Mode with the keypad.

  • Do a Fault Reset to clear the fault.