Code

Name

Causes

Possible Solutions

boL

Braking Transistor Overload

The duty cycle of the braking transistor is high (the regeneration power or repetition frequency is high).

  • Install a regenerative converter.

  • Increase the deceleration time.

You enabled the protective function for the braking transistor when you have a regenerative converter.

Set L8-55 = 0 [Internal DB TransistorProtection Selection = Disable].

The braking transistor in the drive is broken.

Replace the drive.
Note:

If the drive detects this error, the terminal set to H2-01 to H2-03 = 10 [MFDO Function Selection = Alarm] will activate.