|
bCE
|
Bluetooth Communication Error
|
The smartphone or tablet with DriveWizard Mobile installed is too far from the keypad.
|
Use the smartphone or tablet 10 m (32.8 ft) or nearer to the keypad.
Note:
bCE can occur when the smartphone or tablet is 10 m or nearer to the keypad depending on the specifications of the smartphone or tablet.
|
|
Radio waves from a different device are causing interference with the communication between the smartphone or tablet and keypad.
|
Make sure that no device around the keypad uses the same radio bandwidth (2400 MHz to 2480 MHz), and prevent radio interference.
|
Note:
-
The drive detects this error when you operate the drive with a smartphone or tablet with a Bluetooth LCD Keypad.
-
If the drive detects this error, the terminal assigned to H2-01 to H2-03 = 10 [MFDO Function Select = Alarm] will activate.
-
Parameter o2-27 [bCE Detection selection] enables and disables bCE detection.
|