|
bCE
|
Bluetooth Communication Fault
|
The smartphone or tablet with DriveWizard Mobile or DriveWizard installed is too far from the keypad.
|
Use the smartphone or tablet 10 m (32.8 ft) or nearer to the keypad.
Note:
bCE can occur when the smartphone or tablet is 10 m (32.8 ft) or nearer to the keypad depending on the specifications of the smartphone or tablet.
|
|
Radio waves from a different device are causing interference with communications between the smartphone or tablet and keypad.
|
Make sure that no device around the keypad uses the same radio bandwidth (2400 MHz to 2480 MHz), and prevent radio interference.
|
Note:
-
The drive detects this error when you use the Bluetooth LCD keypad to operate the drive from a smartphone or tablet.
-
Do a Fault Reset to clear the fault.
-
Set the stopping method for this fault in o2-27 [bCE Detection Selection].
|